Chat Now
Cat5E RJ-45 Toolless Keystone Jack in Black
In Stock This item should ship today (11/27/2015) if ordered within 13 hours 43 minutes

0.17 lbs

Flat Rate Shipping Prices

  • 0-3lbs- $4.99

Cat5E RJ-45 Toolless Keystone Jack in Black

Easy to use, toolless (no soldering or screwdriver req.) modular CAT 5e Keystone jack. RJ45 female connector. To be used with keystone wall plate or panel. Wiring diagram on clip.
This product is intended for use with 23~24 AWG Solid Ethernet cable. It will not work well with stranded Ethernet cable. If you're using stranded Ethernet cable, please use a punch-down style keystone jack.

Note that the width of the RJ45 keystones is such that two cannot be used side-by-side in the same wall-plate.

Comes with lever for ease of installation and retaining clip for secure connection.
Click the following link for an installation guide:
*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, improvements and physical design changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown. 
*The color indicated can vary in tone and/or hue between production runs and manufacturing facilities.  The color of this item may not be an exact match to any other product, even if they are indicated as being the same color, whether sold by Monoprice or any other vendor.  Individual pieces may also vary very slightly in color from each other.


20 Reviews

72.5% of the reviewers recommend this product


Not so great

  • scott ward,
  •  wichita, KS 
  • 7/28/2014 11:21:43 AM

Pros: smaller. they work.

Cons: extremely difficult to use. took 4-5 times longer to use than the traditional ones I have always purchased.

Do not order these for a large project a I did. tripled the install time.

Was this review helpful to you?

Easy to use keystone jack

  • Vince,
  •  Warren, OH 
  • 2/27/2014 6:37:05 AM

Pros: Easy and quick to use.

Cons: None found

No tools required, simply strip the jacket off, separate the wires, put them in the color coded spots and squeeze closed. Trim the ends off and pop into the cover.

Was this review helpful to you?
  • Larrimore Adams,
  •  Lachine, QC 
  • 12/15/2013 7:01:22 AM

Works great. Just don't forget to use solid wire instead of the cheap thin stranded stuff. Otherwise use thicker stranded cable.

Was this review helpful to you?

Great Value in Jack

  • domainlogic,
  •  Goshen, IN 
  • 8/19/2013 9:57:18 PM

Pros: -inexpensive
-very clearly labeled wire chart on jack (better than the direct ink to plastic)
-comes with insert tool (not needed)
-narrow keystone jack (fit 6 gang wallplates and Leviton biscuit surface mount boxes)
-best of the sub $3 RJ45 jacks.

Cons: -none so far (only have had for a month)

I have been installing, terminating, testing and certifying fiber/stp/utp/coax/twinax for almost 13 years. I have spent as much as $20 (per jack) for IBM type 1A and have found cheap Chinese RJ45 for $0.40
In some cases, I am going through hundreds of jacks in a single day (new construction) or just need a couple for a single cable drop.
I purchased these specific jacks to replenish the single packs in my tool grab-bags. (and so far have only used a couple). I am very pleased with the ease of use.
Time will tell if the cables creep (I have had happen with some major label and most china-made ones), but they had low loss and noise when certified with the TDR.
I will definitely purchase more of these.

Was this review helpful to you?

Good quality , best price

  • pm,
  •  Sunnyvale, CA 
  • 5/17/2013 10:25:52 PM

really gud quality
Cheap price
easy to use

Was this review helpful to you?
Tax and shipping will be calculated at checkout