3-Way Adjustable Tilting DUAL Desk Mount Bracket for LCD LED (Max 33Lbs, 10~23inch) - Black
Free space on your desk and gain improved ergonomics by using this 3-Way Adjustable Tilting Monitor Desk Mount Bracket from Monoprice!
Using a desk mount bracket provides additional desk space by moving the monitor above the desk. The bracket allows you to position your monitor at eye level, which reduces neck and back strain and aches from length sessions in front of the computer.
The mount attaches to the edge of a desk, table, or other horizontal surface with a maximum thickness about 1.75". The mount has two 14.2" jointed extension arms, which allows you to position your monitors at exactly the right height, angle, and distance. The monitors can be tilted and rotated, allowing for easy conversion between landscape and portrait mode on the monitor. It fits two monitors up to 33 lbs weight each with either 75x75 or 100x100 VESA mounting pattern.
Fits two monitors with VESA 75x75 and 100x100 mounting patterns
Tilts +/- 30 degrees
Rotates 360 degrees allowing for easy portrait or landscape orientation
Pros: Solid construction of the base, arms, and mounts.
8 of each type of VESA mount screws for matching monitors were included.
Easy to adjust, tighten, and move monitor arms when necessary.
Cons: Assembly is a bit difficult for one person to do alone. Needed some help to clamp both arms together around the mounting pole.
I use two identical 23" monitors, and for some inexplicable reason, the left monitor sits a little more than 1/2" lower than the right. I've adjusted many settings but is the same each time.
Overall: Great monitor stand for the price, solid parts, relatively easy to assemble (with two people), and very stable after all is said and done. The only downside is the mismatched monitor arm heights, which I cannot figure out.
Was this review helpful to you?
Rating: (6 out of 10)
Reviewer: Dan Dehaan from Grand Rapids, MI
5/1/2014 11:35:37 AM
Cons: Monitors jiggle a bit, one monitor tends to be up higher than the other.
One of the monitors tends to be half and inch above the other depending on how you adjust the arms in or out. Also the base tends to make the monitor shake a bit, but I imagine that issue exists with most desk mounts...my single mount didn't have that problem however.
Was this review helpful to you?
Rating: (1 out of 10)
Reviewer: Anonymous from Franklin Lakes, NJ
4/22/2014 6:59:12 AM
Make sure you confirm with a CSR they FIT!
Cons: Wouldn't fit my LED monitors
After speaking with a rep about the best dual bracked mount for my work desk - they advised to purchase these, I purchased 2 paid $50+ for shipping only to find out when I rcvd them that they wouldn't fit my LEDs since there is no VERSA bracket. Paid $60+ for shipping BACK to monoprice, with no relief from monoprice they said they couldn't find the chat history to possibly reimburse me my s/h charges. So these cost me $100+ and I have nothing to show as I returned them. MAKE SURE YOU SAVE EVERYTHING you converse/chat w/ monoprice and make sure they fit! Wont be purchasing from here again
Was this review helpful to you?
Rating: (8 out of 10)
Reviewer: Vern in Austin TX from Dripping Springs, TX
3/21/2014 12:55:00 PM
Pros: All parts were included, even the allen wrenches to put the unit together. Strong mount and very adjustable. Because of the ball-joint connector you can easily rotate a monitor from landscape to portrait and tell Windows to flip as well for reading long tall documents or web pages. Very adjustable and allows you to reclaim a lot of desk space you may not have even noticed was being consumed by the traditional desktop stands.
Cons: Not a "precision" mount. a slight annoyance is that one of the arms is slightly "lower" than the other due to a bit of slop in the elbow joint. This results in the monitors maligning by about 1/4" when they are facing forward and pressed together to make one long landscape display. The ball joints are also kinda picky- specifically if you over tighten the screws you can't move the monitors at ALL, but if you loosen just a bit too much the monitors will not hold their positions. I would have liked to have seen a finer thread screw or maybe some a rubber or plastic pad inside the ball socket that would make for a wider adjustment in the amount of friction.
This mount is really perfect for my use as I needed a low cost, durable and flexible setup for two monitors. I work for a magazine so having the ability to rotate one monitor for portrait mode is slick! This mount did the job for me. Note that, though a couple of reumentary wire clips are attached to the arms, you will have to provide your own wire-ties, velcro straps or twisty-ties to really keep the cables all clean and out of your way.
Note to monoprice folks: I would love to see a *triple* monitor version of this arm! :)
The review you submit will be displayed on the customer review page after it has been verified. It will generally take one business day to verify your review.
Use of profanity is strictly prohibited and any profanity found on your review will be subject to be deleted. If you see any profanity in any other reviews, please report it to email@example.com.
Please wait to write your review until after you have had an opportunity to evaluate a fully functional unit. Questions regarding a product or issues with configurations should be directed to our online tech support chat.
If you believe you may have received a defective unit, remember that Monoprice backs everything we sell with a warranty. Please use our automated return service to request a replacement. Any other issues with your order not directly related to the product itself should be directed to our online customer support chat.
Note: All or part of any product review including the Review Title, "Your Nickname", Rating, Pros/Cons, images and all other parts of the review itself may be used by Monoprice in future marketing campaigns or promotions in any media. Submission of a product review signifies consent that the information you submit may be used at Monoprice's discretion without any further notice or expectation of compensation. You are further representing that any submission is wholly an original creation by you and/or that any portion taken from third party sources have fully cleared for use.
If you want to write a review, please login first by clicking here.