7-Port USB 3.0 Combo HUB (3.0 x 4, 2.0 x 3) w/ AC Adapter - 12V/2.5A
    Product # 9956
    7-Port USB 3.0 Combo HUB (3.0 x 4, 2.0 x 3) w/ AC Adapter - 12V/2.5A
    Product # 9956
    $33.09
    Quantity:
    In Stock This item should ship today (5/25/2016) if ordered within 2 hours 4 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $33.09
    Qty: 2-9 $32.31
    Qty: 10-19 $31.55
    Qty: 20-49 $30.78
    Qty: 50+ $30.01

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    7-Port USB 3.0 Combo HUB (3.0 x 4, 2.0 x 3) w/ AC Adapter - 12V/2.5A

    Maintain SuperSpeed connectivity for all your external USB devices with this 7-port USB 3.0 Hub from Monoprice!

    This hub features four USB 3.0 ports, which are capable of reaching speeds of up to 5.0 Gbps, while at the same time maintaining full backwards compatibility with USB 3.0/1.1/1.0 devices. It also features three USB 2.0 ports for connecting to older devices. It comes with a 12 VDC, 2.5A power supply, allowing it to provide the sufficient power for self-powered devices (e.g., 2.5" portable hard drives).

    The hub measures only 5.5" wide, 1" high, and 3.2" deep. It features power and activity LEDs on the front, so you can always know the status of your connections. Two of the USB 3.0 ports are on the back and two are on top within easy reach. It uses a USB 3.0 micro-B connector for the connection from the computer, so it can only be connected to a USB 3.0 port.

    44 Reviews

    54.32% of the reviewers recommend this product

    ADD YOUR REVIEW

    Better than you may realize

    • Kirk Poschman,
    •  San Marcos, TX 
    • 2/28/2016 8:41:50 AM

    Pros: More forgiving than most USB 3.0 hubs

    Cons: Wish it had 10 ports.

    I have been hunting for a USB 3.0 hub for some time. One item I attach to a hub is Monoprice's Microscope [ 60x, 250x Digital Microscope with Suction Cup Stand and Observation Pad Product 11613]. It is a USB 2.0 device and has always worked fine, even directly attached to a USB 3.0 port on the PC. However, when I tried four USB 3.0 hubs, all caused a Windows 8.1 error that would not let the microscope connect. Well, this hub allowed it to connect on one of the USB 3.0 ports. No doubt it is a microcode problem in the other hubs, but this one works!

    Was this review helpful to you?

    Cheap flimsy construction

    • Scott,
    •  Tustin, CA 
    • 2/4/2016 9:34:00 AM

    Pros: looks nice

    Cons: falls apart internally

    After about 2 years of light usage, the input port broke off the internal circuit board.

    Was this review helpful to you?

    Broke just after its year warranty...of course.

    • John,
    •  Chino Hills, CA 
    • 1/28/2016 3:14:21 PM

    Pros: Great while it works. nice lights on the front. Decent power.

    Cons: Too fragile. wish it was a little heavier so it would control the wires instead of the USB cables tilting the hub back.

    I have had this hub for 2 months past a year and the top 2 USB 3.0 ports broke from the mother board. If you pull the USB forward it will connect. I am guessing that top 2 ports have disconnected from the main board. back ports still working. It sits on my desk all of the time, out of the way. So it doesn't get beat up at all. I guess the designer didn't take into account that we might put USBs in the top 2 ports. Silly me. For 35 bucks, I expected more. Still like Monoprice though just wish they wouldn't back some of the junk they have on their site.

    Was this review helpful to you?

    Good while it lasts

    • Anonymous,
    •  Glendora, CA 
    • 1/18/2016 7:16:33 PM

    Pros: When it worked it was great

    Cons: When it didn't it wasn't

    Worked for a couple of years and then died. When I took it apart I found that one of the chips had fried. Looks to be a design flaw.

    Was this review helpful to you?

    Had for 2 years then it broke

    • Scott,
    •  Tustin, CA 
    • 12/20/2015 6:50:43 PM

    Pros: 2 USB 3.0 ports on top, 2 in back, plus 3 USB 2.0 nice aesthetic design

    Cons: ports only supported by solder joints

    The input port broke, literally broke off the circuit board, rendering the hub useless... and I was careful with it! When it was working it was ok.

    Was this review helpful to you?
    SIGN UP FOR EMAIL DEALS
    SUBTotal
    Tax and shipping will be calculated at checkout
    MY CART