This Digital Coax Cable is made from premium quality RG-6/U with double copper braid shielding to prevent signal degradation caused by EMI and RFI interference. This cable is ideal for conducting S/PDIF digital audio signals and other high-bandwidth content, but it can also be used for composite video and other line level RCA signals.
The CL2 rating on this cable indicates that the jacket has been treated so that it complies with fire safety regulations, making it safe for use through or within the walls of residential class buildings.
- Gold plated RCA male connectors
- Rubber-covered, molded connector housings
- 97% pure oxygen-free copper conductor
- Double shielded with copper braiding
- 22 pF per foot capacitance
- 75 ohm impedance
|50ft High-quality Coaxial Audio/Video RCA CL2 Rated Cable - RG6/U 75ohm (for S/PDIF, Digital Coax, Subwoofer & Composite Video)|
|Question: Can I use this cable to transmit composite video?|
|Question: How can this one cable be effective for use with digital audio, LFE and composite video?|
|Answer: It is not uncommon for the CE industry to base a signal transmission standard on a pre-existing cable format. In fact, it would be very inefficient to make a new type of cable for every new type of signal (even though it sometimes seems like they do it anyway). In this case, all three of these signal types were based on signal transmission through 75 ohm coaxial cable terminated with RCA connectors. In fact, any signal transmission standard that utilized 75ohm coax cable with RCA connectors can use these cables.|
|Question: Isn''t it better to use dedicated cables for subwoofer connection?|
|Answer: What are often labeled Subwoofer cable are often a result of Marketing Spin and/or a little Consumer Electronics Voodoo. |
If the cables are a result of pure spin, then the cables are exactly the same and there''s no reason to pay more for a cable that is specifically labeled, "Subwoofer Cables."
If the cables really are "Tuned" to more effectively carry only the low frequency signals, then that''s probably a lot worse. Most high end powered subwoofer manufacturers will tell you that they put a lot of development time into matching the cabinet design, drivers, amp and crossover network in order to tune the subwoofer and give it the right voice. This tuning is based on the fact that the inputs of the sub will receive a full frequency signal that the crossover will filter to provide the appropriate signal for the amp to amplify. But if the cable is pre-filtering the signal then it is in fact coloring the signal and causing the crossover to filter out of tune. Or that is, the sound would not be as rich and full as it would be if the components of the sub were allowed to do its job with a full range signal from a proper cable.
|Question: What''s the difference between RG59 and RG6?|
|Answer: RG59 and RG6 stands for Radio Guide. It''s a standardization form for coax cables and specifies things such as impedance (75 ohms in this case) and wire gauge. The RG59 uses a 22AWG (American Wire Gauge) center wire and the RG6 uses a 18AWG wire. That means that the RG6 is a thicker cable than the RG59 since lower AWG''s denote a thicker wire. Thicker gauge wires are ideal for longer cable runs. |
Our RG6 premium cables also feature more robust RCA connectors and are certified for in-wall use.
|Question: Are the connectors gold plated? What does gold plating do?|
|Answer: Yes, they are. Gold plating provides resistance against corrosion that would otherwise impede signal transfer and could damage connections on equipment.|
|Question: Are these cables rated for in-wall use? What is CL2?|
|Answer: Yes, they are. CL2 means they have been certified by Underwriters Laboratories for in-wall use. It means that these cables have a slow burning outer jacket, should meet most fire codes. |
The CL2 rating does not affect the appearance or performance of the cables. They can be used in or out of wall.
| rated by 93 user(s) |
Click here to review!
If you want to write a review, please login first by clicking here.
Monoprice welcomes your feedback. The review you submit will be displayed on the product's review page after it has been verified. It should take about 2-3 business days for this process. Monoprice verifies customer reviews and will publish them after making sure they comply with our review guidelines. You may be contacted by Monoprice regarding your submission.
We will remove reviews that:
- Contain profanity or other objectionable content. Should you find any profanity or objectionable content, please contact us at firstname.lastname@example.org
- Fail to focus on the product. Complaints about shipping or customer service issues will be forwarded to Customer Service to be addressed. Reviews that discuss other products, catalog copy, pricing, or other ancillary issues will be removed.
- Contain advertisements or promotional materials or contain links to external content. Monoprice will also remove reviews submitted by or on behalf of a company with an interest in a competing product.
- Any other content we deem to be inappropriate.
If you believe you may have received a defective unit, remember that Monoprice backs everything we sell with a warranty. Please use our automated return service to request a replacement. Any other issues with your order not directly related to the product itself should be directed to our online customer support chat.
Note: All or part of any product review including the Review Title, "Your Nickname", Rating, Pros/Cons, images and all other parts of the review itself may be used by Monoprice in future marketing campaigns or promotions in any media. Submission of a product review signifies consent that the information you submit may be used at Monoprice's discretion without any further notice or expectation of compensation. You are further representing that any submission is wholly an original creation by you and/or that any portion taken from third party sources have fully cleared for use.