Chat Now
1x4 Mini HDMI® Splitter w/ 3D Support
Add to Wishlist +
Out of Stock ETA: 12/21/2015
- -

Due to limited supply, all products are sold on a first-come first-serve basis.  Auto Notification does not guarantee either availability or price. All prices are subject to change without notice.

*Your information will only be used to notify you when this item becomes available. Carrier charges may apply for SMS text messages.


1.35 lbs

Flat Rate Shipping Prices

  • 0-3lbs- $4.99

1x4 Mini HDMI® Splitter w/ 3D Support

Watch your video content on four displays at the same time using this 1x4 HDMI® Splitter from Monoprice!

If you're looking for a high quality 1x4 HDMI splitter that will fit in a tight space, this is the product for you! It offers all of the functionality and great features of the larger models in a small form factor for applications where space is a concern. It has a single HDMI input port and four HDMI output ports, each of which are gold-plated to ensure smooth, corrosion-free connections. The splitter is powered by an included 5 VDC AC adapter. This splitter offers proof that good things do come in small packages!

The splitter supports High Speed HDMI signals, which means that it supports the following HDMI features:

  • 1080p Resolution - It supports the full 1080p@60Hz HDMI resolution.
  • 3D Video - It supports all standard HDMI 3D modes.
  • Deep Color - It supports deep color up to 12-bits per channel, 36-bits total.
  • High Definition Audio - It supports high-definition multi-channel audio signals, including Dolby TrueHD™ and DTS-HD Master Audio™.

Note: Monoprice strongly recommends using 22AWG, 24AWG, or active HDMI cables with Redmere technology to achieve the best results and to ensure minimum signal loss over longer distances.

Support Files:

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc.

Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

Inputs 1x 19-pin female gold-plated HDMI Connector (Type A)
Outputs 4x 19-pin female gold-plated HDMI Connectors (Type A)
Supported Video Resolutions 480p, 720p, 1080i, 1080p
Deep Color Support Supports 12-bit deep color up to 1080p
Supported Digital Audio Formats LPCM, Dolby AC-3, DTS 7.1, DSD
Video Amplifier Bandwidth 140MHz
Single Link Range 1920x1200, 1080p
Vertical Frequency Range 60Hz (fully compatible with 120Hz and 240Hz televisions)
Data Transfer Rate 6.75Gbps (per channel)
Power Supply 5 VDC
Dimensions 4.5" x 2.4" x 1.0" (115 x 62 x 25 mm)
Weight 6.7 oz. (190g)

Package Contents:

  • 1x 1x4 Mini HDMI Splitter
  • 1x 5V DC Power Supply
  • 1x Operating Instructions

78 Reviews

85.9% of the reviewers recommend this product

  • Anonymous,
  •  Kansas City, MO 
  • 10/19/2015 10:00:05 AM

Splitter works great for about 2-3 years then it starts to get flaky and die. At year 3 this time, I'm on my second one and it works for 10-20 minutes before picture dies. Then you need to cycle power and unplug the input and plug back in.

Was this review helpful to you?
  • Anonymous,
  •  Charlotte, NC 
  • 5/20/2015 4:36:56 PM

Pros: Heavy duty, easy to use

Cons: Unit fried on me after using for 45 days. LEDs quit working and was very hot to the touch. Let it cool but it never functioned again.

Worked well when it worked, would try same unit again. Filed for RMA with Monoprice, which they make a very easy process

by Monoprice Administrator

Thank you for your review on PID 7618. I apologize for the experience you have faced while using this splitter. I will submit a complaint regarding this so our product team can investigate this issue further. We truly appreciate your time and feedback! Sorry again for any inconvenience this may have caused and should you have any questions, please feel free to contact us!

Gabby V.
Tech Support Associate
Was this review helpful to you?

Great Product - I have 2

  • K-Bar,
  •  Oklahoma City, OK 
  • 5/16/2015 4:26:57 PM

Pros: I have 2 of these units installed that have worked flawlessly for a couple of years now.

Cons: I have apparently damaged 1 by upgrading the HDMI input wire to Redmere with a CAT 5 HDMI output adapter.on the output (or at least that seems to be the problem). Also, it says it supports 3D, but only one of the attached TVs is 3D and DirecTV doesn't recognize it. Not important since I rarely watch 3D. Simple to direct connect.

2 DirecTV boxes - 7 TV's. Enough said. You can't beat the price and reliability.

Was this review helpful to you?

Nice Little HDMI Splitter

  • Benny from Indiana,
  •  Bloomfield, IN 
  • 3/27/2015 8:51:16 AM

Pros: Small and easy to fit in my theater equipment. Input jack is on one end, three outputs are on the back, and one on the opposite end make routing cables versatile. Lights on the front indicate connections and power on. Fairly inexpensive.

Cons: Input jack is on one end, three outputs are on the back, and one on the opposite end might make routing cables difficult if all HDMI cables enter from the same direction and are not flexible (my Monoprice HDMI cables running through walls are about a half inch thick and not very bendable).

I bought this unit to replace the Monoprice pro model I had that got smoked by a power spike. That unit worked great for 6 years. This one is $40 less, but works just as well. I run 4 HDMI cables to 4 TVs spread around my house. Cables are 25 to 35 feet long. I have no issues on any of the TVs (all 1080HD, two are LCD, two are projectors). I like the cool looking blue status lights.

by Monoprice Administrator
Hi Benny,

Thank you for your review, glad to hear you are enjoying PID 7618! To protect from future power spikes, you may want to look into using a surge protector such as the following:

Hope this helps!

Gisselle B.
Tech Support
Was this review helpful to you?
  • Anonymous,
  •  Greensboro, NC 
  • 2/23/2015 6:58:21 PM

Pros: Small footprint, easy to install

Cons: No audio on second tv

First TV with a 75' active HDMI cable works all of the time with no issues. Second TV located 10' from the splitter only recognizes VGA signal until power cycled to splitter after TV is on. No audio on second TV.

by Monoprice Administrator

Thank you for your review and truly sorry to hear about the issues experienced with PID 7618. Can you clarify a bit for me what is meant by "only recognizes VGA signal", please? Is there an HDMI to VGA converter being used in this setup? If I may ask, what source device is in use here and what are the lengths and gauges (AWG) of all HDMI cables in the setup? Also, can we test the second TV with the other outputs on this splitter to see if this issue persists? Please let me know so we can look into this further. Thank you in advance!

Gabby Villa
Tech Support Associate
Was this review helpful to you?
Tax and shipping will be calculated at checkout