Chat Now
3x1 Digital and Analog Audio/Video to HDMI® Converter Switch
In Stock This item should ship tomorrow (11/30/2015) if ordered within 14 hours 2 minutes

2.97 lbs

Flat Rate Shipping Prices

  • 0-3lbs- $4.99

3x1 Digital and Analog Audio/Video to HDMI® Converter Switch

Combine DVI/Component video conversion with HDMI® switching into one convenient device!

This converter/switch allows up to three different video inputs: one Component Video (YPbPr), one DVI, and one HDMI. You can select which of the three video inputs is sent to the HDMI output using the Switch on the front of the unit or the included remote control. The Component and DVI inputs will be converted to HDMI before being sent to the HDMI output.

The converter/switch also switches and converts audio along with the video, with three different audio inputs allowed: HDMI, analog stereo, and Digital Optical Audio (Toslink). The HDMI audio is tied to the HDMI video input, so whenever you select the HDMI video you will also get the HDMI audio.

However, the other two audio inputs can be used with either of the non-HDMI video inputs. If you have the DVI or Component video input selected, the switch will automatically use whichever non-HDMI audio input is active (so only one of the two devices should be on at a time).

In addition to sending the audio output on the HDMI channel, the converter also sends it simultaneously to an Digital Optical Audio (Toslink) output, so you can send the audio to both your AV receiver over Toslink and your TV over the HDMI cable.

The converter/switch is HDCP compatible and supports video resolutions up to 1080p, as well as high resolution audio, such as DTS-HD Master Audio™, and Dolby TrueHD™. A proprietary Advanced Color Engine in the converter unit enhances the quality of the converted video with brilliant and fresh color, intensified contrast and details, vivid skin tones, sharp edges, and accurate and independent color control.

Support Files:

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc.

Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

Maximum Video Resolution 1920x1080 (1080p)
Video Output HDMI with HDCP support
DVI Input DVI 1.1v
Component (YPbPr) Input up to 1080p maximum
Vertical Frequency Range 50/60Hz
Video Amplifier Bandwidth 165 MHz / 1.65 Gbps per channel
Supported Video Resolutions 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Color Depth 8-bits per channel (24-bit total)
Supported Analog Audio Input 2-channel stereo
Supported Digital Audio Input LPCM, DTS-HD Master Audio, Dolby TrueHD
Supported Digital Audio Output LPCM, DTS-HD Master Audio, Dolby TrueHD
Input Power Requirement 5V DC, 2A
Power Consumption 5 Watts
AC Adapter Input Requirement 100-240V AC, 50/60Hz, 0.5A Max
Operating Temperature +32 ~ +158°F (0 ~ +70°C)
Operating Humidity 10 ~ 85% RH (no condensation)
Storage Temperature +14 ~ +176°F (-10 ~ +80°C)
Storage Humidity 5% to 90% RH (no condensation)
Dimensions 10.2" x 4.9" x 1.3"
Weight 1.8 lbs. (832g)
Regulatory Compliance FCC, CE, UL (Canadian and US), RoHS

Package Contents:

  • 1x 3X1 HDMI converter/switch
  • 1x Remote control with installed battery
  • 1x AC adapter with 44" cord

13 Reviews

58.46% of the reviewers recommend this product


Good solution for limited-input TVs.

  • Anonymous,
  •  Kenosha, WI 
  • 9/2/2014 7:25:23 AM

Pros: Switches have a nice solid feel. Video processing is accurate. Very compact size.

Cons: The downside to it's compact size is that it is not rack-mountable. And the LED's are indeed very bright however, electrical tape or some "Dim-it" (available thru Amazon) easily fixes the problem.

My current TV has only two HDMI inputs and only one Component input. I am using this item with a Toshiba HD player and an old Sony DVD player. I do not use the DVI. I also have not yet used the remote.
The unit functions perfectly. Switching is quick. Colors and positioning seem accurate. A nice solution to bring my components together on my limited-input tv. Highly recommended.

Was this review helpful to you?

Poor Quality - 2nd Unit- We will see.

  • Lee,
  •  Kaukauna, WI 
  • 7/12/2014 6:06:50 AM

Pros: Has all the connections I need in a decently sized form factor.

Cons: Led's are blinding, recommend covering them with black tape to hide after done (at least if you have a harmony remote).

First unit came only partially functional (didn't switch properly/had to switch to same port multiple times to get picture to come in correctly), and the remote control that came with unit and my harmony didn't control correctly (press 3 sometimes get 1 or 3, same with pressing 1), sent this unit back.

Second, replacement unit, came with a damaged dvi port that I had to bend open to get pins to fit (not confident in correction since port is already damaged/plastic meant to separate the pins is damaged). I did get this one working however, and am currently testing even with damaged port.

Overall, I have enjoyed monoprice's quality and prices, but this appears to be an exception. I will update my rating later/re-rate after playing with for a few days/weeks.

by Lee
Update from original review. The converter took a crap on the component side. It still works for the hdmi and dvi imputs, but the component side took a still allows audio for component, but video is unviewable, pops-up a white and green screen where I can only make out a few words. I used a separate component to hdmi adapter that I have to confirm it was the adapter, it is/it plays well through older adapter with no problems. Lasted barely a year, I RECOMMEND YOU DO NOT PURCHASE THIS PRODUCT.
Was this review helpful to you?

Does what it needs to

  • Anonymous,
  •  Washington, DC 
  • 10/25/2013 6:41:36 AM

Pros: Does what it needs to. Solid, good construction.

Cons: Only one of each kind of input. Most of us have more than one source of a type.

It's ok, it does what it needs to, but the thing could really stand a second component or HDMI in. I mean really, how often do people use DVI on a home theatre? Most of this is for video games and media players with HDMI or Component, I suspect, and this only allows in of one each.

Was this review helpful to you?

Component with audio to HDMI is it defective?

  • Bruce Satow,
  •  Concord, CA 
  • 10/16/2013 3:27:46 PM

Pros: Inexpensive. Easy to install. Sturdy exterior build.

Cons: Quality control of electronics and picture quality. Over saturation and too bright. Picture flashes on and off to blank screen when you use menu guide on the TV or remote control of cable/satellite box.

I use a Dish VIP 211 satellite receiver. The HDMI is disabled so I only have the component output. I wanted to use an HDMI cable to go to the television instead of having five wires (3 component, 2 audio) so I purchased this converter. My television is a Samsung UN39FH5000F 1080p LED HDTV. When I used the converter, the picture kept flashing from the video to a black screen. Eventually that stopped, but when I use the Dish program guide or the TV volume control it would start that flashing again. Like it loses the signal and tries to sync and locks in again. If you just watch one channel, never change it or adjust the volume the picture is stable. Also, no matter what you do to try and adjust the brightness or color saturation, the converter box fights your settings and goes back to what ever it seems to be defaulted to. I am not sure if this is a defective unit or if it is incompatible with my set, but whatever it is, I'm disappointed.

Was this review helpful to you?

HDMI converter does not do what iot is supposed to do.

  • Fred,
  •  Thousand Oaks, CA 
  • 4/12/2013 12:45:37 AM

Pros: It does convert component to HDMI ONLY if the component signal is "progressive" or higher.

Cons: If you have an older DVD or super VHS unit with standard component output, don't expect this unit to work. The unit also defaults to the HDMI to HDMI switch when power is shut off and turned on again when both the HDMI and component inputs are used. This causes confusion when outputing a signal from more than one source. Finally the instruction booklet is absolutely worthless as very little of the functions are covered. The remote is very weak. I have tested two units with the same result in every action mentioned above.

I will continue to look for a switching unit that will actually do what this unit claims it will do. In other words convert all component signals to HDMI.

Was this review helpful to you?
Tax and shipping will be calculated at checkout