3x1 Enhanced HDMI® Switch with Built-In Equalizer & Remote Control
    Product # 8462
    3x1 Enhanced HDMI® Switch with Built-In Equalizer & Remote Control
    Product # 8462
    $19.99
    Quantity:
    In Stock This item should ship today (8/29/2016) if ordered within 6 hours 43 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $19.99
    Qty: 2-9 $19.97
    Qty: 10-19 $19.94
    Qty: 20-49 $19.89
    Qty: 50+ $19.79

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    3x1 Enhanced HDMI® Switch with Built-In Equalizer & Remote Control

    Enjoy the easy switching life with the Monoprice 3x1 Enhanced HDMI® Switch!

    This switch allows you to connect three HDMI inputs and direct them to a single HDMI output. It fully conforms to the the HDCP and includes support for all 3D formats.

    Two of the inputs are in the traditional location on the back, while the third is on the front panel. This allows you to easily make temporary connections, such as from a phone or tablet, without having to reach behind and locate the plug by feel.

    The switch includes a remote control, with an on/off button, three direct access buttons, and a pair of directional buttons to cycle between available inputs. Whenever a device is turned off, the unit automatically switches to the next device in the chain, the same as if you had pressed the "next" button on the remote or pressed the "Touch switch" on the front panel.

    The switch also incorporates an amplifier, which automatically regenerates the HDMI signal to full strength, allowing you to use longer-than-normal HDMI cables from the input devices. An external 5VDC power supply is required and supplied with the unit.

    Note: Monoprice strongly recommends the use of minimum 24 AWG HDMI cables when connecting a device, such as this switch, between the source and destination devices to ensure minimal signal loss and maximum High Speed signal reliability.




    Maximum Video Resolution 1920x1080 (1080p)
    Video Input 3x HDMI®
    Video Output 1x HDMI® with HDCP and 3D support
    Vertical Frequency Range 50/60Hz
    Video Amplifier Bandwidth 250 MHz / 2.5 Gbps per channel
    Supported Video Resolutions 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
    Color Depth 12-bits per channel (36-bit total)
    Supported 3D Formats 1080p @23.98/24 Hz, 720p @59.94/60/50 Hz, bandwidth up to 250 MHz
    Supported Audio Formats LPCM, DTS® Digital, Dolby® Digital, DTS-HD Master Audio™, Dolby TrueHD™
    Input Power Requirement 5 VDC, 2A
    Power Consumption 5 Watts
    Operating Temperature +32 ~ +158°F (0 ~ +70°C)
    Operating Humidity 10 ~ 85% RH (no condensation)
    Storage Temperature +14 ~ +176° (-10 ~ +80°C)
    Storage Humidity 5 ~ 90% RH (no condensation)
    Dimensions 6.1" x 2.7" x 1.0"
    Weight 9.2 oz. (260 g)
     


    Package Contents:

    • 1x 3x1 Enhanced HDMI Switch
    • 1x AC adapter with 44" cord
    • 1x Remote control with installed battery
    • 1x User's manual


    Support Files:



    HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

    DTS® is a registered trademark and the DTS logos, Symbol, DTS-HD™, and DTS-HD Master Audio™ are trademarks of DTS, Inc.

    Dolby® and the double-D symbol are registered trademarks of Dolby Laboratories.


     

    125 Reviews

    80.96% of the reviewers recommend this product

    ADD YOUR REVIEW

    Worked OK at first- now auto switching no longer works

    • Cmor1701d,
    •  Somerset, NJ 
    • 7/31/2016 3:24:32 PM

    Pros: Easy setup
    Inexpensive.

    Cons: Bright LEDs on front panel
    Auto-switching does not work well

    As mentioned in many other posts, the LEDs are extremely VERY bright.
    Easy setup, and I used cables purchased from Monprice. Worked great at first, then one of the inputs ceased to work. I use the output to my AV receiver with input from cable and my computer. The computer is connected to the Input 1 which is on the front of the unit, but the computer is not usually plugged in.
    When I turn on the system (AV unit and TV) the unit will not switch or display the cable signal. If it does (1 in 10 times) and I change anything from the cable box (rewind, pause, change channel, etc) the unit stops the cable signal to the TV and I need to find and press the remote to select the correct input (Input 3 as Input 2 no longer works).
    It works, but it's frustrating and annoying that it doesn't work as expected.


    by Monoprice Administrator
    Hello,

    Thank you for your review and I am truly sorry for the inconvenience you've encountered with this item. Did you want to try a replacement to see if it'll work better? Or, if you are unsatisfied with the item, I can assist you in setting up a return. Please let me know, thank you!
    Was this review helpful to you?

    Great 3X1 HDMI switch

    • Peter S.,
    •  Union City, CA 
    • 6/2/2016 8:53:36 AM

    Pros: Works as advertised.

    Cons: As mentioned in many other posts, the LEDs are extremely VERY bright.

    Easy setup. Worked perfectly out of the box. Good value as compared to other manufacturer's.

    Was this review helpful to you?

    Great HDMI switch (with bright status lights)

    • Betty S.,
    •  Queensbury, NY 
    • 3/3/2016 4:58:03 AM

    Pros: Easy to plug several HDMI inputs into the switch, no more fussing with changing cables behind the TV. Easy to change from using one input to another.

    Cons: Bright status lights really do need something to cover them up.

    Works as advertised, easy to set up. The status lights on the front are really bright, as noted by others. A few layers of opaque tape toned them down.

    Was this review helpful to you?
    • Dave,
    •  Chicopee, MA 
    • 9/6/2015 9:14:04 PM

    Pros: Great unit. Small but very functional easy to hide. Just plug and play, so to speak.

    Cons: Not a major issue but the bright blue lights, when in use, can be a bit distracting, at first. My solution was to put a small statue/knickknack in front of it, positioned so the remote still sees the unit. Perfect fix it blocks the lights and they aren't noticeable.

    I'm glad I found this, as it solved my problem of multiple HDMI units. I would recommend it to anyone.

    Was this review helpful to you?

    3X1 Enhanced HDMI® Switch w/ Built-In Equalizer & Remote

    • DM,
    •  Burbank, CA 
    • 8/25/2015 12:07:25 PM

    Pros: Works great! Just as advertised!

    Cons: If I had to list something... There is about a 5 second delay when switching between channels. In our application, that is not a concern, but it may be for someone.

    Easy setup. Worked perfectly, out of the box. Good value as compared to other manufacturer's.

    Was this review helpful to you?
    SIGN UP FOR EMAIL DEALS
    SUBTotal
    Tax and shipping will be calculated at checkout
    MY CART