Volume Pricing (Log In to see Member Pricing)
3x1 Enhanced HDMI® Switch with Built-In Equalizer & Remote Control
Enjoy the easy switching life with the Monoprice 3x1 Enhanced HDMI® Switch!
This switch allows you to connect three HDMI inputs and direct them to a single HDMI output. It fully conforms to the the HDCP and includes support for all 3D formats.
Two of the inputs are in the traditional location on the back, while the third is on the front panel. This allows you to easily make temporary connections, such as from a phone or tablet, without having to reach behind and locate the plug by feel.
The switch includes a remote control, with an on/off button, three direct access buttons, and a pair of directional buttons to cycle between available inputs. Whenever a device is turned off, the unit automatically switches to the next device in the chain, the same as if you had pressed the "next" button on the remote or pressed the "Touch switch" on the front panel.
The switch also incorporates an amplifier, which automatically regenerates the HDMI signal to full strength, allowing you to use longer-than-normal HDMI cables from the input devices. An external 5VDC power supply is required and supplied with the unit.
Note: Monoprice strongly recommends the use of minimum 24 AWG HDMI cables when connecting a device, such as this switch, between the source and destination devices to ensure minimal signal loss and maximum High Speed signal reliability.
|Maximum Video Resolution||1920x1080 (1080p)|
|Video Input||3x HDMI®|
|Video Output||1x HDMI® with HDCP and 3D support|
|Vertical Frequency Range||50/60Hz|
|Video Amplifier Bandwidth||250 MHz / 2.5 Gbps per channel|
|Supported Video Resolutions||480i, 480p, 576i, 576p, 720p, 1080i, 1080p|
|Color Depth||12-bits per channel (36-bit total)|
|Supported 3D Formats||1080p @23.98/24 Hz, 720p @59.94/60/50 Hz, bandwidth up to 250 MHz|
|Supported Audio Formats||LPCM, DTS® Digital, Dolby® Digital, DTS-HD Master Audio™, Dolby TrueHD™|
|Input Power Requirement||5 VDC, 2A|
|Power Consumption||5 Watts|
|Operating Temperature||+32 ~ +158°F (0 ~ +70°C)|
|Operating Humidity||10 ~ 85% RH (no condensation)|
|Storage Temperature||+14 ~ +176° (-10 ~ +80°C)|
|Storage Humidity||5 ~ 90% RH (no condensation)|
|Dimensions||6.1" x 2.7" x 1.0"|
|Weight||9.2 oz. (260 g)|
- 1x 3x1 Enhanced HDMI Switch
- 1x AC adapter with 44" cord
- 1x Remote control with installed battery
- 1x User's manual
- User's Manual (Aug 19, 2011)
HDMI®, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
DTS® is a registered trademark and the DTS logos, Symbol, DTS-HD™, and DTS-HD Master Audio™ are trademarks of DTS, Inc.
Dolby® and the double-D symbol are registered trademarks of Dolby Laboratories.
PROS: Works well and switches to the DVD when I turn it on and I really like that feature and then goes back to the cable box
CONS: Always on, so using vampire power when not in use. would like to be able to power it down with a remote.
PROS: Works great! Just as advertised!
CONS: If I had to list something... There is about a 5 second delay when switching between channels. In our application, that is not a concern, but it may be for someone.
PROS: Quality easy setup
PROS: Works very well
PROS: worked flawlessly
CONS: none whatsoever
PROS: Works great, used it to send PS3,XBOX360 and WDtv to my 1x4 splitter so that I dont have to move my systems around the house
Thanks for your help.
PROS: The Monoprice 3:1 splitter works perfectly and takes about 2 minutes to set up.
HIGHLY RECOMMEND - - - GREAT VALUE