16 Channel CCTV Camera Power Supply - 12VDC - 10Amps
    Product # 6875
    16 Channel CCTV Camera Power Supply - 12VDC - 10Amps
    Product # 6875
    In Stock This item should ship today (10/20/2016) if ordered within 1 hour 22 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $35.03
    Qty: 2-9 $33.74
    Qty: 10-19 $31.82
    Qty: 20-49 $30.55
    Qty: 50+ $29.29

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    16 Channel CCTV Camera Power Supply - 12VDC - 10Amps

    Powering multiple cameras could not be easier! Monoprice''s line of Professional CCTV Power Supplies give installers what they expect when it comes to power supplies, quality and reliability. Every channel is protected with Auto-Reset PTC fuses, which means these fuses will not blow. This box can be mounted to any surface, plugged into an AC outlet, and up in seconds!
    Video Baluns (PID#6878) can easily be added by using DC Power Pigtails (PID# 6880)
    • 12VDC - 10amp supply current
    • Multiple outputs (16 channel)
    • 16 auto-reset PTC fuse protected output
    • Power on/off switch
    • DC regulated, over current and voltage protected
    • Individual LED indicator for each out put
    • Dimensions:25cm×21.3cm×9.5cm
    • Fuse Rating: 1.1A


    25 Reviews

    80.4% of the reviewers recommend this product


    Great Camera Box

    • Kay,
    •  ,  
    • 9/26/2016 3:00:07 PM

    Product worked as advertised and they are easy to install! We use these in our restaurants and they work perfect for us. They are a well built security camera box and works great for us. We have over 60 restaurants and they all have camera systems.

    Was this review helpful to you?

    it work, and is far cleaner then a bunch of individual power supplies

    • surfertom,
    •  Redondo Beach, CA 
    • 9/1/2016 4:49:35 PM

    Pros: up to 16 cameras and a good price

    Cons: not as much power as the 8 camera system....

    I used this with 8 cameras each with a 60' cable worked perfectly and we have room to add more

    Was this review helpful to you?

    Great Distribution Power Supply

    • Bill Otto,
    •  LaGrange, GA 
    • 8/24/2016 3:48:24 PM

    Pros: Individual terminal strip pairs for each camera connection

    Individual PTC resettable fuses and Red LEDs on each output (labelled PTC1-PTC16, and LED1-LED16, as expected)

    Output 's (and Output LEDs) are plainly marked "1-16" in big numbers on the silk-screened PCB

    Labelled "Main Power" switch (on the power distribution PCB) to shut off all DC outputs

    Green LED (LED17) showing power supply output into the distributon PCB is OK

    The box has 5 knockout holes - 2 each on each side, and one in the bottom - and an oval-shaped cutout in the back middle of the box, for wiring to be fed from inside a wall cavity (or through the wall), that the box was mounted on

    Cons: Need to add BIG + and - 's to show the polarity on the output terminal strips, too

    The placement of the side knockouts - two are directly over the distribution PCB, and the other two are to close to it. To keep the wiring bundle neat, a better place would be in the empty space above the power supply (and at least 3/4" below the distribution PCB). This would still be low enough to break out from a wiring bundle to bring the two power wires up to each terminal pair for each camera from below (black wire on bottom/common terminal, and red wire on top/fused output terminal, with enough slack on the red wire to move it sideways to get to other nearby bottom terminals, if needed). If the distribution PCB were tall enough, with a lot of space between the (upper "fused output" and bottom "Common outputs") terminal strips, where a wire bundle could lay on top of the PCB, splitting the wire pairs top (red) and bottom (black), then two larger knockouts centered between the terminal strips, might make sense. But with the current size of the PCB and terminal strip spacing, go with the smaller knockouts, and place them at least 3/4" below the PCB.

    Another suggestion - supply snap-in-place grommets to be used in the knockout holes that get punched out.

    Final suggestion - don't put the Monoprice label on the outside of the box, so everyone knows this is the "SECURITY CAMERA POWER SUPPLY" - put it on the inside of the box where it won't be so obvious what the box is.

    I like this camera power supply. Nice small box with ample capacity for 16 or more cameras. The only reason for the "4" rating is, like most OEM equipment in my humble opinion, there is still a little room for improvement.

    Other than the suggestions below, don't change a thing!

    Was this review helpful to you?

    Excellent - Look No Further

    • Plainswind,
    •  Ammon, ID 
    • 7/13/2015 9:13:14 AM

    Pros: Excellent build quality
    Easy to wire
    Power indicator for each channel
    Excellent price

    Cons: None

    This CCTV 12-channel power supply is excellent, both in build quality and functionality.
    I recognized the switching power supply used in this unit with other products I have used in the past that used it as well. (Most are high-end and expensive devices.) On seeing this, I knew it will work without issue with my CCTV system.
    It hangs up great was easy to wire and closes up to leave a nice finish. For those that need the extra output, or to clean up their CCTV systems that have a power adapter for each camera, or those that use one power adapter to split out to multiple cameras, this unit will clean up your installation to look great and make it reliable as well.

    Was this review helpful to you?

    Great Product..Great Seller

    • Ronald Dahlhaus,
    •  Morris Plains, NJ 
    • 6/7/2015 5:18:12 PM

    Pros: Product worked as advertised and was as easy of an install as one could expect! Made me look like a professional security camera installer!

    Cons: Shipping was a bit slow..but then again...did not have a rush for the item.

    Was this review helpful to you?
    Tax and shipping will be calculated at checkout