Volume Pricing (Log In to see Member Pricing)
Two-Piece Inset Wall Plate with 4 Inch Built-in Flexible High Speed HDMI® Cable With Ethernet - Single Port (1P) - White
Vertical Adjusting Ceiling Bracket for Projector w/ 200mm Extension (Max 22Lbs) - BLACK
This bracket allows you to mount your projector to a ceiling with an angle of up to 15 degrees.
This mount holds a projector from the top at a distance of 7.9" (200 mm) from the ceiling surface. It can accommodate projectors with a 3 or 4 mounting holes and a spacing diameter of 1.6" to 12.2" (40-310 mm) and a weight of up to 22 lbs (10 kg).
Provided the total diameter of the projectors wires/cables is less than the internal diameter of the vertical mounting bar they can be contained within the vertical bar for a neat and professional appearance. The projector can be tilted in both the horizontal and vertical axes, ±5 degrees horizontally and ±15 degrees vertically. Positioning screws allow precise control of the tilt angles, while locking screws keep it in the perfect position.
Included in the Box:
- 1x MPCN-D200 Projector mount assembly
- 4x M6x25 tapping screw sets
- 4x 6x50 wood screw
- 2x M5x8 phillips screw
- 6x M5x10 phillips screw
- 4x M5x30 phillips screw
- 4x M4x30 phillips screw
- 4x M3x30 phillips screw
Projector not included!
- User's Manual (Nov 25, 2011)
PROS: good quality, sturdy.
CONS: Too SMALL
And easy to mount and put together. I would not hesitate to buy another one.
PROS: Easy to assemble and easy to mount.
CONS: None so far
PROS: It comes with screws.
PROS: Sturdy, with appropriate hardware
PROS: Very nice, solid construction and plenty of choices to adjust projector tilt in both directions.
CONS: Wish instructions were better written with steps to follow and clear indications what screws are used for what steps and even better bigger readable fonts..
PROS: Bracket appears sturdy but won't work with my projector
CONS: Maybe this is obvious to others but it wasn't to me, the holes are to measured diagonally, not across. My projector has 4 holes and they are 12" apart. I thought I was good. But, they are 13.25" apart on the diagonal so this mount won't fit on my projector
PROS: Easy to hang, versatile.
CONS: Not adjustable after install
PROS: Worked great for my projector, Adjustable to fit many types of projectors, easy to adjust when mounted.
Additionally, the decorative cover that is supposed to go over the mount where it is attached to the ceiling is helkd on by a spring that clips into two tiny plastic loops on each side of the mount. One of my loops was broken so it was kind of useless.
I love Monoprice cables but my first foray outside of cables was a huge disappointment.
CONS: Limited radius.