Chat Now
3-Gang 7.1 Surround Sound Distribution Wall Plate w/ HDMI®
In Stock This item will ship on 11/30/2015 if ordered within 1 days 23 hours 54 minutes

0.84 lbs

Flat Rate Shipping Prices

  • 0-3lbs- $4.99

3-Gang 7.1 Surround Sound Distribution Wall Plate w/ HDMI®

This home theater plate provides all the flexibility that a professional installer or experienced do-it-yourselfer needs to create a sophisticated media environment. The plates are easy to terminate and contribute to a neat looking and finished installation. Clear labeling also simplifies room set up and configuration.

Please Note: The subwoofer connection is an RCA connection on the front and an RCA connector on the back.
This product can either be used with banana plugs (product ID 2801 or 2943) or it can accept bare wire connections on both the front and rear of the plate.
Note:  Not compatible with DUAL banana plugs like PID# 2944 & 2945.  Works fine with individual single banana plugs. 
*The color indicated can vary in tone and/or hue between production runs and manufacturing facilities.  The color of this item may not be an exact match to any other product, even if they are indicated as being the same color, whether sold by Monoprice or any other vendor.  Individual pieces may also vary very slightly in color from each other.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Includes 3-gang white plate with 7-pair binding posts and HDMI® port.
Allocates 7 pair of the binding posts with 3 pair for the left side, 3 pair for the right side, and 1 pair for the center.
Includes 1 RCA jacks for subwoofers.
Installs in a NEMA 3-gang box.
Comes with all necessary screws.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

55 Reviews

89.82% of the reviewers recommend this product


3-gang 7.1 Surround Sound Distribution Wallplate Mounting

  • GC,
  •  Georgetown, TN - Tennessee 
  • 9/11/2015 2:48:37 PM

Pros: Nice design & appearance,

Cons: Hard to find Nema enclosure to fit it.

Bought this for my home installation originally done by a semi-pro who didn't allow any slack in speaker wires he installed. As noted under "Cons" finding an enclosure for this plate proved to be difficult. Although I would have much preferred a plastic box I wasn't able to find one. Did finally find an aluminum box at (3-Gang Weatherproof Deep Box with Seven 3/4 in. Outlets Model 203638238 4 threaded plastic knock-out plugs are included). This box will work cleanly with slight shortening of the six longer mounting screws (included with the box). Used two right angle flex metal conduit connectors - mine box is mounted out of sight in the back of a cabinet.

Was this review helpful to you?

Doesn't fit standard 3-gang wall mount

  • ckronengold,
  •  Livingston, NJ 
  • 9/1/2015 1:38:34 PM

Pros: Looks great. Makes connections easy.

Cons: Doesn't fit standard 3-gang wall plate. Easy for main screws to "strip" the plastic of the plate.

this is the 2nd time I'm purchased this item, and both times, the wall plate doesn't cover / fit a standard 3-gang mounting bracket. It will screw into the top holes, but the bottom holes are then about 1/2" beyond the holes in the mounting bracket.

bottom screws end up going directly into the wall, and are slightly less secure than going into the plate.

Also, be careful when tightening the main screws in the plate. It is easy to overtighten and have the screws go right through the plate. Had to back them out to make sure the plate didn't slip off the back.

Was this review helpful to you?
  • Nathan Stevic,
  •  Lutz, Fl 
  • 3/4/2015 9:56:47 AM

Pros: - Has screw-down/banana plugs
- Has subwoofer jack
- Has HDMI jack

Cons: - Screws to mount the individual sections to the low voltage plate are WAY too long.
- Needs to have an optical jack as well in the empty spot

Overall this plate was easy to install. It had everything I needed except the optical jack. So I bought a keystone optical jack and removed it from the holder, then drilled a hole in the empty section of the plate and glued it in. Now I have everything I need in this set.

Was this review helpful to you?

Looks nice and works

  • meet_the_dean,
  •  Toledo, OH 
  • 2/26/2015 4:29:18 PM

Pros: A far better alternative to having a host of different speaker plates to connect your surround sound. Looks better than just running wires through a hole in the wall. It's also really nice that each of the speaker plugs is labeled. Makes it far easier to keep track once you've buttoned everything up and are plugging your receiver into it.

Cons: I wish the front of the item was cleaner and didn't have the black outline. None of my other speaker plates have this and I just don't like it.

It would also be nice if the plugs used swapable keystone jacks instead of permanent plugs. I'd like to be able to had a network jack to this, but instead, I have to cut another hole in my wall and but another gang box, plate, and jack.

If you want a way to hook your sound system up that looks clean and professional, this is it. My biggest complaint is the black line that runs around the outside of the plate, but most of us are going to hide this behind an entertainment center anyway. You can't beat this, especially the price.

Was this review helpful to you?

Wall plate for Home Theater

  • David,
  •  Peyton, CO 
  • 12/21/2014 9:40:47 AM

Pros: Great plate at great price to help with clean installation of home theater system.

Cons: None

I have always found what Ive needed at Monoprice and at great prices. Moved into new house and needed to install a home theater system without having wires cluttering the walls or running along the floors. This wall plate was just what I was looking for.

Was this review helpful to you?
Tax and shipping will be calculated at checkout