Premium 3D Printer Filament PLA 1.75MM 1kg/spool, White
    Product # 10552
    Premium 3D Printer Filament PLA 1.75MM 1kg/spool, White
    Product # 10552
    In Stock This item should ship today (6/27/2016) if ordered within 43 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $19.99
    Qty: 2-9 $19.75
    Qty: 10-19 $19.50
    Qty: 20-49 $19.25
    Qty: 50+ $18.99

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    Premium 3D Printer Filament PLA 1.75MM 1kg/spool, White

    Get outstanding 3D printing results when you use 1.75mm PLA 3D Printer Filament from Monoprice!

    PLA is a good choice for a printing material if you are looking for high accuracy and high resolution. It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%). PLA is harder than ABS, but is therefore also a bit more brittle. Additionally, PLA is a plant-based plastic, which means that it is biodegradable and gives off a slightly sweet odor, like roasting corn.

    This 1 Kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.03mm. It has a nominal processing temperature of 210° C (410°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament.

    The negatives of using PLA is that it is vulnerable to degradation from moisture, sunlight, and heat. Additionally, it is more prone to overheating during processing, which can cause dripping and drooping if it gets too hot.

    Reel Dimensions:

    • Reel Diameter: 195mm (7.68")
    • Hub Diameter: 95mm (3.74")
    • Spindle Diameter: 38mm (1.50")
    • Reel Width: 80mm (3.15")

    Related Categories

    5 Reviews

    88% of the reviewers recommend this product


    Top quality / great prints with Monoprice Maker Architect

    • Anonymous,
    •  Jersey City, NJ 
    • 2/27/2016 10:54:40 AM

    Pros: Exactly as described with no printing issues.

    Cons: None so far and I'm a repeat customer.

    Works exactly as described and my prints have been of excellent quality. No issues to report and, as usual, top notch products from Monoprice. I'm using this with their Maker Architect printer.

    Was this review helpful to you?

    Average quality, wrapped too tight

    • Anonymous,
    •  Milwaukee, WI 
    • 2/3/2016 10:05:42 PM

    The filament is wrapped too tight, meaning that every 20 minutes or so it gets tangled and I have to manually intervene to untangle it.
    I have to babysit long prints which is extremely annoying.

    Was this review helpful to you?

    Works Great

    • CharlieTuna,
    •  Katy, TX 
    • 6/29/2014 11:19:53 AM

    Pros: In terms of roundness my digital micrometer says the filament is 1.757 in one cross section and 1.770 measured ninety degrees to the first. Personally I'd call that spot-on. Winding on the spool if fine and it feeds without any problems.

    Cons: None.

    I've been printing with this filament for a week now. Probably I've printed for a total of 20 hours with no issues at 195 degrees C. I use an infill of .3, layer heights of 0.1 mm while printing perimeters at 40mm/s and infills at 80mm/sec. In terms of opacity, 5 solid layers are enough to not see the infill underneath.

    I'm still a noob, but I'm had absolutely no trouble using this filament.

    Was this review helpful to you?

    Using in a Printrbot Simple Maker with alu extruder

    • Thomas Yost,
    •  Winter Park, FL 
    • 5/26/2014 9:34:15 AM

    Pros: So far this filament is way better than the sample filament that came with the bot. I haven't had any problems with the diameter being too large and jamming up the extruder. The overall size of my filament has been between 1.5-1.7mm so you might have to adjust accordingly.

    Cons: None

    All future purchases of filament will be from monoprice! Just like my laser toner.

    Was this review helpful to you?

    Used in my Printrbot Simple Metal - love it

    • Mario Lurig,
    •  Broomfield, CO 
    • 5/12/2014 3:10:43 PM

    Cons: slightly wider (80mm)

    Picked this up along with a Raspberry from Printrbot... and I love this much more. Maybe it's the white rather than a rich color, but printing with this filament has been fantastic for me. I'll be buying all my spools at Monoprice now.

    Was this review helpful to you?
    Tax and shipping will be calculated at checkout