Coaxial Cable Stripper
    Product # 3359
    Coaxial Cable Stripper
    Product # 3359
    In Stock This item should ship today (10/26/2016) if ordered within 3 hours 43 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $5.59
    Qty: 2-9 $5.39
    Qty: 10-19 $5.19
    Qty: 20-49 $4.99
    Qty: 50+ $4.79

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    Coaxial Cable Stripper

    Used by professional cable installers who need to make precise strips on either RG6 and RG59 cables. Simply squeeze the tool to insert the cable, release and spin it using the extra-large finger hole. Pull out the perfectly prepared cable. Strips 4,8, and 12mm lengths.

    3 blades ensure accurate stripping length of each cable section. Built-in hex screws for accurate depth-of-cut adjustment. Preset stripping length of 12mm (8mm + 4mm). Blades may be repositioned to give a 10mm (6mm + 4mm) stripped length.

    • For RG58, RG59, RG62 & RG6
    • Fixed 3-blade construction
    • Strips cable-jacket, shield & insulation

    36 Reviews

    81.11% of the reviewers recommend this product


    Too much setup required

    • Anonymous,
    •  Orlando, FL 
    • 3/11/2016 5:19:35 AM

    Pros: It works after I got it all setup

    Cons: Had to open it up and rearrange the blades spending more than an hour.

    Yes, this product works great after you get it all adjusted. But it's hard to recommend a product that requires over an hour to set it up with no instructions at all. Fortunately there are some helpful reviewers on this site who laid out what needs to be done to adjust it to trim RG6 for F connector. I shouldn't have to open up a product and rearrange the blades for it to work. Sell different versions of the product configured for the type of cable you need. Or include instructions of how to modify for the various types. But if you ship with no instructions it should work out of the box and not require digging through the reviews.

    Was this review helpful to you?

    does what it should after being setup

    • Anonymous,
    •  Schwenksville, PA 
    • 1/22/2015 10:03:47 AM

    Pros: cheap

    This works well once you adjust it properly. Follow the directions in the reviews on how to adjust it. I have RG6 quad shield and it works perfectly, does not cut braiding, etc.

    Was this review helpful to you?

    Simple and Inexpensive

    • Chris,
    •  Onalaska, WI 
    • 12/30/2014 1:58:16 PM

    Pros: Easy to use

    Cons: None so far

    I purchased this stripper along with the 7050 RG6 compression tool to clean up some coax wiring in my house. I've played with coax cabling a little in the past but I recommend checking out any of the YouTube videos for proper use of a stripper tool. After a quick refresher lesson, the first trial was a success. No adjustments necessary on the tool. Simple to use and very inexpensive without being cheaply built. This stripper should last a long time for normal residential use.

    Was this review helpful to you?

    Works well, and is a real bargain

    • HDTV Studio Engineer,
    •  Alexandria, VA 
    • 10/19/2014 5:11:55 PM

    Pros: Strip length is appropriate for Kings trim code 3-661-1 (full crimp BNC connectors for Belden 1694A and 1695A HD video coax).

    Cons: None.

    A real bargain. I bought two. Optimized the cut depth of one for 3 GHz Belden 1695A coax, and the other for the slightly larger diameter of 4.5 GHz Belden 1694A. With careful use the results are perfect nearly every time.

    Was this review helpful to you?

    Good Cable Stripper

    • Soren Stoutner,
    •  Wickenburg, AZ 
    • 9/13/2013 3:33:48 PM

    This is a good cable stripper.

    Was this review helpful to you?
    Tax and shipping will be calculated at checkout