Chat Now
High Quality Banana Binding Post Two-Piece Inset Wall Plate for 1 Speaker - Coupler Type
In Stock This item should ship today (11/25/2015) if ordered within 5 hours 39 minutes

0.32 lbs

Flat Rate Shipping Prices

  • 0-3lbs- $4.99

High Quality Banana Binding Post Two-Piece Inset Wall Plate for 1 Speaker - Coupler Type

Wall plate with high quality gold plated binding posts for speakers.

Can be used with banana plugs, spades, or bare wire.
Same type of connector front and back.
No soldering required.
Corrosion resistant gold plated connectors.

Spacing is compatible with PID# 2944 & 2945 banana plugs.

This product can either be used with banana plugs (product ID 2801 or 2943) or it can accept bare wire connections on both the front and rear of the plate.

*Monoprice continually strives to improve its product line to bring our customers the best products available. Therefore, changes may be made to listed specifications without prior notice. Item received may not match photo or specs shown. 
*The color indicated can vary in tone and/or hue between production runs and manufacturing facilities.  The color of this item may not be an exact match to any other product, even if they are indicated as being the same color, whether sold by Monoprice or any other vendor.  Individual pieces may also vary very slightly in color from each other.
**Requires low voltage mounting bracket - not included**

Dimensions -  2 3/4" x 4 1/2"

119 Reviews

96.47% of the reviewers recommend this product


Good Looking Cheap Hardware

  • Anonymous,
  • 7/31/2015 11:28:15 AM

Pros: Good looking plate on front end.

Cons: The supplied screws are cheap flat heads. Easily damaged loosing the head. Do not drill.

I installed 4 of these in a living room for surround sound system. These are easy to install into low voltage wall boxes. The supplied screws are cheap metal flat head that do not screw easily. The whole head fell off of one completely. Frustrating install.

Was this review helpful to you?

Good product and pricing

  • Nghi Nguyen,
  •  Stittsville, ON 
  • 6/26/2015 10:05:34 PM

Pros: The right price and a very good product

Cons: none

Great price and product, fast delivery. I'll buy again from Monoprice

Was this review helpful to you?

Great solution for handsome wall connection to speakers

  •  Mountlake Terrace, WA 
  • 3/12/2015 3:24:09 PM

Pros: Does just what you'd want it to do

Cons: Nope

Good stuff. Room looks more put together with quality speaker connectors.

Was this review helpful to you?

Great product, after turning the couplers

  • Jim S,
  •  Fort Wayne, IN 
  • 3/4/2015 1:46:55 PM

Pros: Great price! 4 of these and one with 2 pairs on it for less than the cost of one at local home improvement store.
2 piece units. I mounted these outdoors in weatherproof electrical boxes and didn't need the decora covers, just the insert.

Cons: Have to loosen the nut on each connector and turn it slightly so the wires passing through the binding posts have more room and less chance to short out.

Great product. Used with 14 gauge wire to connect 6 speakers in my back yard. Used on plate with 2 pairs (3325) for the patio speakers, and a total of 4 of these across my back wall, all in weatherproof PVC boxes. I didn't use the decora plate covers - can donate them to charity - and didn't use the screws as they were either too long or too short for my application. Bought stainless steel philips head 6-32 by 3/4" at local hardware store. These are working out great. Once installed I can easily take in my speakers or change them out!

Was this review helpful to you?

Good connectors, bad plate

  • Alex,
  •  Sacramento, CA 
  • 3/1/2015 7:01:48 PM

Pros: Good quality connectors

Cons: bad plate

I ordered 5 of these, one came with some dents, as if someone stabbed the inner plate with a screwdriver a few times.

When combining with "1-Gang Low Voltage Mounting Bracket"(7013), plate sits ~2mm from the wall, which is a very noticeable gap. There are 2 factors contributing to this problem.

1) The inner plate is too thick, it actually protrudes outside of the finish plate and would result in around a 0.5mm gap even if installed directly to the wall without any mounting bracket, which offsets the plate an additional 1mm. I've already installed a couple keystone wall plates from monoprice, none of which have this issue, the inner plate on those items is actually recessed into the finish plate to allow room for the mounting bracket and sit tightly against the wall once installed.
2) The bracket mounting screw heads are too bulky, they add another ~0.5mm to the final offset because they don't let the inner plate & finish plate sit tight against each other. I also happen to have the "2-Gang 5.1 Surround Sound Distribution Wall Plate" (4012) which has different screws (phillips& not as massive head), which actually fit just right with these wall plates. I don't know why they weren't included with this plate.

No issue with the actual connectors.

Was this review helpful to you?
Tax and shipping will be calculated at checkout