Chat Now
8inch 28AWG High Speed HDMI® With Ethernet Male to Female Port Saver - Black
In Stock This item should ship tomorrow (11/27/2015) if ordered within 19 hours 4 minutes

0.3 lbs

Flat Rate Shipping Prices

  • 0-3lbs- $4.99

8inch 28AWG High Speed HDMI® With Ethernet Male to Female Port Saver - Black

This Port Saver helps to put less stress on the internal ports of your devices. Very snug fit which will help to prevent HDMI® connection problems of having cables come loose.
Monoprice HDMI® cables are made with COPARTNER  brand UL certified cable bodies.  Copartner is one of the largest and most well respected producers of raw cabling in the industry.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Related Categories

37 Reviews

98.11% of the reviewers recommend this product


Works perfect for Chromecast

  • Jersey Devil,
  •  New York, NY 
  • 11/14/2015 9:26:11 AM

Pros: Inexpensive, flexible, heavy duty

Cons: N/A

I bought this to supplement my 1st Gen Chromecast and it works perfectly. It's stiff at first but once you flex it a couple times, it breaks in. Even the media controls over HDMI work fine with it. I recommend this 100%.

Was this review helpful to you?

Very Handy!

  • Anonymous,
  •  Ithaca, NY 
  • 7/28/2015 8:36:49 AM

Pros: Very handy for plugging HDMI cables into hard to reach areas. My new Sony smart TV has the HDMI inputs in a very hard to reach place underneath the set. I use this port saver to reach it and not have to keep plugging things into the set itself.

Cons: None.

Very handy device! Some TVs have very hard to reach HDMI ports. Plug this port saver in, and you're done. Just plug you devices into the port saver after that.

Was this review helpful to you?

Plenty Good

  • wiregrass,
  •  Montgomery, AL 
  • 7/20/2015 2:10:51 PM

Pros: Useful, heavy duty, well made.

Cons: None.

This is probably better than it really has to be. It is 28 gauge, and that makes for a rather heavy duty cable. This turned out to be too short for my application, but I will gladly keep it, because it might be useful somewhere else as an extension.

Was this review helpful to you?

I ordered these for 22AWG long HDMI cables

  • Anonymous,
  •  Firestone, CO 
  • 4/11/2015 2:55:09 PM

Pros: Very flexible and no signal loss

Cons: None

I ordered these port saver cables to terminate a 75' 22AWG HDMI cable, which is very thick, to save the ports on my signal source and keep the ports from breaking due to the very thick gauge cable required for a 75' run. Very good quality cable.

Was this review helpful to you?

I order these for every flat-panel TV installation

  • Cisco Kid,
  •  Malvern, PA 
  • 12/24/2014 3:24:44 AM

Pros: reasonable price, good quality, works as advertised

Never knowing exactly what difficulty I might face connecting the HDMI port on the back of a wall-mounted flat-panel TV to the HDMI cable coming out of the wall, I always order each of these handy connectors: Port Saver Male to Female Swiveling Type (5133), Port Saver Male to Female - 270 Degree (3850), Right Angle Port Saver Adapter 90 Degree Vertical Flat Left (4859), Right Angle Port Saver Adapter 270 Degree Vertical Flat Right (4860) and since I'm usually running a long (and therefore thicker and stiffer) HDMI cable through the walls, I also make my life easier by using a short, thinner and more-flexible cable at the TV end: 8-inch 28AWG High Speed HDMI with Ethernet Male to Female Port Saver - Black (6061). Obviously, I don't use all the swivel and right-angle connectors on every installation, but it's worth a few bucks to have the right one(s) when I need them.

Was this review helpful to you?
Tax and shipping will be calculated at checkout