1X2 PRO Series Powered HDMI® Splitter with 3D support (Rev. 2.0)
    Product # 7522
    1X2 PRO Series Powered HDMI® Splitter with 3D support (Rev. 2.0)
    Product # 7522
    In Stock This item should ship today (10/25/2016) if ordered within 7 hours 7 minutes

    Volume Pricing (Log In to see Member Pricing)

    Volume Pricing

    Qty: 1 $49.24
    Qty: 2-9 $48.01
    Qty: 10-19 $46.77
    Qty: 20-49 $45.54
    Qty: 50+ $44.32

    To see and take advantage of our member pricing sign up for a business account or contact our sales team.

    Learn more about Monoprice Business

    1X2 PRO Series Powered HDMI® Splitter with 3D support (Rev. 2.0)

    Watch your video content on two displays at the same time using this 1x2 HDMI® Splitter from Monoprice!

    This splitter features an internal amplifier, which boosts the HDMI signal and allows the use of longer than normal HDMI cable runs. The one HDMI input and two HDMI output ports are gold-plated to ensure smooth, corrosion-free connections. The splitter is powered by an included 5 VDC, 1A AC adapter.

    The splitter supports High Speed HDMI signals, which means that it supports the following HDMI features:

    • 1080p Resolution - It supports the full 1080p@60Hz HDMI resolution.
    • 3D Video - It supports all standard HDMI 3D modes.
    • Deep Color - It supports deep color up to 12-bits per channel, 36-bits total.
    • High Definition Audio - It supports high-definition multi-channel audio signals, including Dolby TrueHD™ and DTS-HD Master Audio™.

    Note: Monoprice strongly recommends using 22AWG, 24AWG, or active HDMI cables with Redmere technology to achieve the best results and to ensure minimum signal loss over longer distances.

    Support Files:

    HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

    DTS is a registered trademark and the DTS logos, Symbol, DTS-HD and DTS-HD Master Audio are trademarks of DTS, Inc.

    Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.

    331 Reviews

    91.36% of the reviewers recommend this product


    Worked great for 3 months

    • Anonymous,
    •  O Fallon, MO 
    • 8/3/2016 10:53:26 AM

    Pros: Easy set-up

    Cons: Only available in Silver color

    Purchased after speaking with the tech team about my signal flicker using my HDMI over Cat6 wall plates 8009 from my Directv unit. After 3 months of use, the picture started to lose connection but retained audio but progressively has gotten worse out of one of the two outputs. I'm using HDMI cables purchased from monoprice and don't want to start throwing $$ at this with the hope that something will fix it. I'm coming out of the splitter into my HDMI over Cat6 wall plates which then run a distance of 56'. My HDMI cables in & out are short lengths of 4'. I've been extremely please with all the products I've purchased from monoprice and know that we'll find a solution.

    Was this review helpful to you?

    Exceeded expectations until...

    • Anonymous,
    •  Wheeling, IL 
    • 6/30/2016 4:44:35 PM

    Pros: Works as advertised
    Can push a clean signal through 100 feet of passive hdmi cable

    Cons: None that I am sure of

    The input to the splitter is a Comcast DVR. Output 1 is connected to a Yamaha receiver and output 2 is connected to a Vizeo TV via a 100 foot long hdmi cable from Monoprice. Everything functioned perfectly for almost a year then one day nothing worked! I discovered to my dismay that the hdmi connections on the DVR the splitter and the Yamaha receiver had all failed. I have no clue what the cause was. I repaired the receiver and replaced the DVR. I purchased a second splitter from Monpoprice and all is working well.

    Was this review helpful to you?

    Does the job

    • Jim,
    •  Vista, CA 
    • 5/9/2016 7:53:14 AM

    Pros: Good price in a powered HDMI splitter.

    Cons: none so far

    I'm using this splitter for a 1080i signal coming off a 15 foot run from a DirecTV HR24 receiver. After splitting, the signal is going 50' down each branch using RedMere cables on each run. I've had it running several days now and everything's working fine.

    Was this review helpful to you?

    Worked well with 8009 HDMI Wall Plate

    • Anonymous,
    •  O Fallon, MO 
    • 4/25/2016 12:37:49 PM

    Pros: Very small unit, simple install

    Cons: None

    I purchased several of the 8009 wall plates over 5 years ago but was getting an occasional flicker when I switched over to Directv's Geni Box and purchased this 1 X 2 splitter to help boost the signal going to my TV's with a distance of 50ft+. This works great and haven't had any signal loss. Haven't attempted to push any 3D content yet.

    Was this review helpful to you?

    Trouble with PS3

    • Chac,
    •  Downers Grove, IL 
    • 4/4/2016 6:14:24 PM

    Cons: Does work properly with PS3 and a 1080P signal.

    The splitter works fine with cable Tv or the PS3 with a 720P signal. It does not work well with the PS3 and a 1080P signal. I have to unplug it several time to get it to work. Very disappointed.

    by Monoprice Administrator
    Hello Chac,

    Thank you for your review and I am truly sorry for the inconvenience you've encountered. Have you tried making sure both TVs are 1080p? As it will always downgrade to the lowest common resolution. I hope that helps, thank you!

    John Lingo
    Tech Support
    Was this review helpful to you?
    Tax and shipping will be calculated at checkout